Loading... Please wait...

ANTMINER S7 BATCH 18 with 2 fans

  • ANTMINER S7 BATCH 18 with 2 fans
  • Bird's eye view:
  • Rear fan view:
  • Front view:
  • Fan removed, view of heat sink configuration:
  • Hashing board with individual heat sinks attached:
Price:
€295.04
SKU:
ANTS7BT
Brand:
Condition:
New
Weight:
7.00 LBS
Shipping:
Calculated at checkout
Quantity:
Bookmark and Share


Product Description

ANTMINER S7 BATCH 18 with 2 fans Specifications:

1. Hash Rate: 4.73 TH/s ±5%

2. Power Consumption: 1293W + 10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)

3. Power Efficiency: 0.25 J/GH + 10% (at the wall, with APW3, 93% efficiency, 25°C ambient temp)

4. Rated Voltage: 11.60 ~13.00V

5. Chip quantity per unit: 135x BM1385

6. Dimensions: 301mm(L)*123mm(W)*155mm(H)

7. Cooling: 2x 12038 fan

8. Operating Temperature: 0 °C to 40 °C

9. Network Connection: Ethernet

10. Default Frequency: 700M

Notes:

1.   Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

2.   PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!

Bitmain recommends the APW3-12-1600-B2 power supply for use with the S7. One power supply support one S7.

3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 10 PCIE connectors connected to power supply. When using differnt PSU and you want to power off the miner, be sure to disconnect all the PSU from power.

http://www.hashingtechno.com/product_images/uploaded_images/s5-control-1-.jpg

This machine is not only our most efficient ever, using less than half the energy per gigahash of the S5, but it is also our most powerful miner to enter mass production (the S5+ had a higher hashrate but was sold on a limited basis). At 0.25 joules per gigahash, this is the most efficient machine available to the bitcoin mining public.

Warranty:

1.A 90-day warranty is provided from shipping out date. To avail this warranty,a Repair ticket must be generated by the customer on Bitmain's website

Overclocking the miner will void the warranty immediately.

2. All sales are final. No refunds will be given. Defective machines can be repaired for free under the Bitmain warranty policy. After the warranty period, machines can be repaired for the cost of parts and labor.

3. In some cases, the warranty will be void, but Bitmain can still do repairs at your own expense if requested. The following events will void the warranty:

     a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;

     b. Damage caused by poor power supply, lightning or voltage surges;

     c. Burnt parts on hash boards or chips;

     d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.

4. Customer must return the defective parts at own expense after opening a support ticket and troubleshooting with Bitmain's instructions.

5. If you notice there are some loose in small heatsinks, please write to sales@hashingtechno.com about the case within 3 days after the package is signed showing in UPS/DHL/FEDEX's website. 

Bitmain does not cover any loss of down time or delay caused by customs. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.

Attention:

Below is the corresponding default frequency for S7 miners with hash rate and batch #.

 

http://www.hashingtechno.com/product_images/uploaded_images/f-h.jpg


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Currency Converter

Add to Wish List

Click the button below to add the ANTMINER S7 BATCH 18 with 2 fans to your wish list.

You Recently Viewed...